debug ha

This command debugs High Availability (HA).

Syntax

# debug ha 

Command	Description
clear-counters	Clears the counters of sent and received HA keep-alive packets periodically sent between Active and Redundant devices.
conn-to-red	Connects to the Redundant device from the Active device through Telnet.
disconnect-system <OAMP Address of Redundant Device>	Disables HA mode and returns the two devices to stand-alone devices. In addition, the Redundant device is assigned the specified OAMP address.
restart-tpncp-conn	Restarts the HA control protocol between the Active and Redundant devices (for internal debug usage).

Note

The command is applicable only to devices supporting HA.

Command Mode

Privileged User

Example

This example accesses the Redundant device from the Active device, and then disconnects HA mode, assigning the Redundant device with a new OAMP address 212.4.55.7:

# debug ha conn-to-red

Username: Admin
Password:

> enable
Password:
# debug ha disconnect-system 212.4.55.7